FAQ's

Shipping: Shipping costs listed are for shipments in the continental United States only, all other shipping must be calculated before transactions can be completed.

Hot Tip : If applying to tinted window(s), order WHITE or light colors... the black or darker colored stickers are better on clear windows, chrome or light colored bumpers, notebooks, mirrors, etc. 

All sticker shipments include How-To-Stick-It instructions.

Q: How long will my sticker/decal last?
A: Most all sticker/decals will last 5-7 years in outside conditions and much longer then that in indoor conditions, (many times the longevity is longer then above listed. 

Q: Where can the sticker/decals be installed?
A: Our vinyl sticker/decal products can be installed on any clean smooth surface, including: metal, glass, plexiglass, painted surfaces, fiberglass and plastics, etc.

Q: How difficult is it to install the sticker/decals myself?
A: It is fairly simple to install all our sticker/decals. The larger sticker/decals are a little tougher, but if you take your time and use the simple to follow included instructions, you will do just fine.

Q: Will They harm the painted surfaces of my car? 
A: Vinyl is used for almost all car and truck lettering and sticker/decals these days, therefore it is a very trusted and a high quality way of doing signage.

Q: Will the sticker/decals affect my rear window defrosters or my tinted windows?
A: Most all our sticker/decals are designed to be applied to the outside of the car. Since they don't actually go on the inside of the car the defrosters and tint will not be affected. 

Q: Are there places on my car that are prohibited by law as to where the sticker/decals can be applied?
A: The laws in the United States vary from state to state and in other countries. The normal rule is that if it doesn't block your vision in normal driving conditions it is normally fine. We strongly recommend checking with your state and local government as to any sticker/decal that may compromise the above.

Q: What are the sticker/decals and graphic lettering made of?
A: All our vinyl products are made from high quality self adhesive vinyl material . The companies that manufacture the vinyl stand by there product as highly as we do. The vinyl is easy to apply and if necessary easy to remove.

Q: How much do you charge for shipping?
A: We ship any package up to $49.99 for just $5.50 for shipping and handling. International Orders add Additional $10. shipping charge.

Q: Do you offer discounts on shipping?
A: Yes, any order that exceeds $50.00 or more is shipped free!

Q: How long will it take to get my sticker/decal?
A: Most all sticker/decals will ship in 24-48 hours from the day you placed your order. This does not include weekends and holidays. Depending on where you are in the U.S.A. will also determine how long it will take to get there.

Q: How do you ship the stickers/decals?
A: We ship Priority Mail via the U.S. Postal service for most all orders, if you place a larger order and it is a larger package we will ship them via U.P.S. or Fed-Ex. If this happens you will be notified prior to shipment of your order. 

Q: How do you put the sticker/decal on?

A: Foolproof method of installing all sticker/decals 

You will need the following items: 

Window cleaner (i.e.: Windex) and lots of paper towels 
A credit card or other stiff plastic card to use as a squeegee 
EITHER - a 1-qt. Spray bottle filled with water and 2 drops of dishwashing liquid OR - a bowl or pan with 1 qt. Of clean water, 2 drops of dishwashing liquid, and a CLEAN sponge or washcloth 
A sewing needle, safety pin, or very small pen knife (with 1" blade) 
For long slogans, I recommend a Level if you have one, to determine what is straight. 
Car in area where temperature is between 55 and 90 degrees.

STEP 1. Clean the surface where you are putting decals with the window cleaner and dry thoroughly. Make sure there is no dirt or wax on the surface. Proper cleaning of the surface will be the difference between a long lasting decal and one that peels off prematurely. Do not install in direct sunlight or when surface is hot. If the decal arrives in a tube allow it to flatten out on a table in a warm room.      

Step 2. Line up you decal on the surface. Secure the decal with some tape, stand back, use a ruler, get a second opinion! Whatever it takes to make sure the decal is straight and in the right spot.

Step 3. Secure the decal with tape, this allows you to control the decal better by creating a hinge to take the backing off. On larger decals a full piece of tape is recommended, two pieces work for smaller applications but on a larger decal run tape all the way down the side you want the hinge on. Remember, the decals are computer cut and level, but the masking and backing are hand cut and are not straight or square or level. Base your level on the decals, not the masking. It is difficult to see what is level…if you are installing a slogan, and can use a level, that is best.

STEP 4. Either spray or use the washcloth/sponge to wet down the surface where the decal goes with the soapy water. Get it good and wet.

STEP 5. VERY SLOWLY peel off the backing. The backing is either paper or it is a clear film. The FRONT of the decal is covered with a masking tape film. As you peel off the backing, make sure that no pieces of decal lift off onto the backing - all pieces should stay on the masking tape film. If a piece starts to lift, then turn it over and squeegee it down hard to make it adhere more firmly to the masking tape. When you have finished peeling off the backing, make sure that no pieces of paper backing are stuck to the adhesive side of your decal - if so, get it off, using the pin or knife tip to grab the edge carefully. 

STEP 6. Hold by the outside edges, slightly bend it in the middle towards the surface you will place it on. Gently place it on the wet surface, middle first, and then lay down to the outside by "rolling" it outwards.

STEP 7. Start to squeegee the decal from the middle outwards, over and over, then harder and harder. Keep squeegeeing for several minutes, very firmly, getting all the water out. When done, use a paper towel to wipe up as much of the water as possible. WAIT AN HOUR. You need to let the water evaporate from under the decal and the masking. Then VERY SLOWLY begin pulling the masking off, starting at the upper left corner, draw diagonally down, and pull SLOWLY. If the decal starts to come up, lay it down and re-squeegee, and you may need to wait longer for things to dry (cold weather and humidity are factors.) 

Our prices are some of the lowest competitive prices you will find especially for the quality and speed in which they will come to you.

Home FAQ Contact US Resources Animal Stickers Texas Stickers Cowboy Stickers Sport Stickers Tribal Stickers Got Stickers Misc. Stickers State Stickers Printed Stickers Texas Tees Skydive Junkies Support Our Troops Official US Foreclosures